MANUAL • Subject to alteration! Version: November 2019
ipf electronic gmbh
• Rosmarter Allee 14 • 58762 Altena
│
Tel +49 2351 9365-0 • Fax +49 2351 9365-19
│
[email protected] • www.ipf-electronic.com
1
OTQ80576
Optical sensors
Diffuse reflection sensor with background suppression
I
plastic housing
I
setting via teach-in
I
status LED as alignment aid
I
M8-connecor 4-pin
TECHNICAL DATA
function
diffuse reflection sensor, background suppression
sensing range
3 … 132mm
sensing distance
20 … 120mm
voltage Vs
10 … 30V DC
current consumption (w/o load)
40mA
voltage drop (max. load)
2V
output current (max. load)
50mA
output signal
Push-pull, no/nc
short-circuit protection
+
reverse polarity protection
+
response / delay time (high-speed-mode)
≥ 0.25ms
sampling frequency (high-speed-mode)
≤ 2kHz
transmitting element (pulsed)
LED, red light, punctiform
wave length
644nm
display (operation)
LED green
display (signal / alignment)
LED yellow
switchpoint setting
teach-in and IO-Link
suppression of reciprocal influence
+
housing material
plastic (ASA, PMMA)
front screen material
PMMA
degree of protection (EN 60529)
IP 67
operating temperature
-25 … +60°C
connection
M8 cable connector, 4-pin, L=200mm
connection accessories
e.g. VK200375
accessories (universal-holder)
AY000116
Connection
Dimensional drawing
small light spot thanks to PIN-Point-LED
IO-Link interface
