manualshive.com logo in svg

ipf electronic opti-check, Technical Documentation Manual, Page: 97 / 332

Share
Download
ipf electronic opti-check Technical Documentation Manual Download Page 97

 

Technical Documentation 

opti-check

 

 

v2.8.2-K11 
 

97/332 

ipf electronic GmbH 

Lüdenscheid, Germany 

 

10.2.10 Job selection / Teach 

 

 
 
Here you can basically set how you want to make the job selection. 

 
Job selection via: 
 
Application Suite / Web interface: 

The job can only be changed manually via the 

Application Suite

 or via 

the web interface.

 

 
Digital inputs: 

Jobs are selected via the digital inputs.

 

 
Command SJ via process interface: 

Jobs are selected via the process interface. 

 
 

Parameters following external teach / SP command 

 
If the "save to device" option is activated, changes resulting from external teach or process interface 
commands in the job are saved to the device. If this option is not activated, changes are discarded when the 
device is rebooted. In this case, the originally saved job is executed. 
 

Summary of Contents for opti-check













































































































































































































































































































































Reviews:

No comments