iPECS LIP-9002 Page 47 User Manual Download

Page: 47 / 61

LIP-9002 User Guide - ST

Misc. Features

8.1

Contrast

The LCD brightness can be adjusted to enhance the display contrast.

To change the LCD Contrast:



While in an idle state, press the VOL



button to adjust the

brightness.

–



- increase (darker),



- decrease (brighter)

8.2

Background Music and Music on Hold

While idle, your LIP phone can play one of the 10 music sources available.
The Background Music (BGM) is played over the speaker of your LIP phone

To turn on Background Music:



While idle, press the HOLD (SAVE) button to cycle through the BGM

selections.

8.3

Using Internal, External and Meet-Me Paging

You can broadcast announcements to other stations and/or external
speakers. Stations are assigned to receive announcements from one or
more of the

Internal Page Zones

. In addition, the system can send

announcements to

External Page Zone

ports that can be connected to

external speakers.

Your iPECS System permits access to the following types of Page Zones.
Note the number of Internal and External Zones varies between the iPECS
systems based on the platform and size of the iPECS system. Contact your
system administrator for details.



Internal Page Zones



Internal All Call Page



External Page Zones

Summary of Contents for LIP-9002






























































Search results

Summary of Contents for LIP-9002

Reviews:

Related manuals for LIP-9002

Brands by name

Popular brands

iPECS LIP-9002, User Manual

Search results

Summary of Contents for LIP-9002

Reviews:

Related manuals for LIP-9002

Brands by name

Popular brands