USER GUIDE
PoE Switch
P o E & O p t i c a l Tr a n s m i s s i o n
Statement
1 PoE switch
1 Power
Cord /
Adapter
1 Mounting Kits
1 User Guide
Copyright
©
201
8
IPCamPower.com
This document contains proprietary information that is protected by copyright. No part of this document may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language, in any form
or by
any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise without the prior written
permission of Our
company.
The information and product specifications within this document are subject to change at any time, without notice
and without obligation to notify any person of such change.
Packing List
Product overview
Product Introduction
IPCP-4P2G-AF
2
PoE Switch was designed specifically for IP cameras that utilize the standard PoE power type of
802.3af. This is a great PoE switch for systems utilizing 4 cameras or less. However, this PoE switch can be used to
power any type of device that uses standard PoE power such as IP phones, Wireless access points, and other
devices that use the 802.3af
/at
standard.
Feature
Compl
ies to
IEEE802.3af
/at
standards.
4 10/100 PoE powered Ports
with 2 additional 10/100 non-powered uplink ports.
All the ports support Auto MDI/MDIX.
Each PoE port support Power up to
30
Watts
with a total budget of 65 Watts for the entire switch
Support IEEE802.3x Full Duplex flow control and Duplex back
pressure flow control fu
n
ction
Automatic MAC address learning and updating.
4K MAC Address
16G Broadband and 192Kb forwarding memory.
High performance full load power configuration.
LED indicator monitor working status and help fault detection
Technical Structure and Port Description
3
4
5
6
LINK
PoE
LINK
SPD
1
2
10/100M
PoE
Switch
PWR
118
mm
25
mm
89
mm
POWER
A
B
C
3
4
5
6
LINK
PoE
LINK
SPD
1
2
10/100M
PoE
Switch
PWR
A.PoE p
ort
B
.
Uplink
C
.
D
C 48-52V
