Tap the
Get CLI
button to display information for the caller, even if the line button is not set to display
CLI information.
The caller’s name or phone number is displayed, according to the CLI display preferences.
For an active or ringing call, tap the
Get CLI
button.
If caller information is available, the turret displays full CLI information for the caller in the Call
Notification area of the footer.
4.12.3
Toggle CLI display
Use a preprogrammed
Toggle CLI
button to control whether the name or number of the caller for
incoming calls is displayed on the turret.
This feature can be programmed at the turret by users with sufficient privileges, or it can be programmed
through the Unigy Management System.
When a call is received, the turret displays calling party information in the Call Notification area of the
footer.
Note
If CLI Toggle is applied when both handsets are in use, the CLI Toggle remains in effect until
both
handsets are released.
To change the display for incoming calls, tap the
Toggle CLI
button.
The CLI display for the incoming extension switches from the current default setting (name or phone
number) to the alternative option: from name to number, or from number to name.
4.12.4
Suppress outgoing CLI information
Use a preprogrammed
Suppress CLI
button, before placing or answering a call, to suppress display of
the calling party identification at the far end.
Tap the Suppress CLI button before a call.
CLI information for an active call cannot be suppressed, because the information is sent when the call is
established.
This feature can be programmed at the turret by users with sufficient privileges, or it can be programmed
through the Unigy Management System.
Note
CLI suppression ends after each call. To suppress CLI information for new calls, the feature must be
enabled again.
1. To block calling information for a call you are making, tap the
Suppress CLI
button.
The
Suppress CLI
button is highlighted to indicate that the feature is enabled. The word
Enabled
is
also displayed on the button.
2. Initiate the call.
No calling identity information appears at the far end. The call shows as Restricted.
4.12: CLI
67
IPC Proprietary
Unigy 4.3
IQ/MAX TOUCH Turret User Guide
Summary of Contents for B02200769
