PLDC01855
CT100 BT Quick Guide
This Guide is intended for quick consultation only and does not replace the Use and Maintenance Manual.
Before using the machine, read the Use and Maintenance Manual contained in the machine packaging thoroughly and rigorously respect all the
instructions.
PREPARATION/
OPERATION
1.
Fill the detergent tank.
2.
Release the parking brake
by pressing the pedal
downwards and to the left.
3.
Release the emergency
button to turn the machine
on.
4.
Insert the brushes under
the head, making sure they
rest against the aligners.
5.
Hold the automatic brush
attachment button down
until they are attached.
6.
Lower the squeegee using
the lever.
7.
Open/adjust the detergent
tank tap.
8.
Operate the drive lever.
Pull it upwards to move the
machine forwards, push it
downwards to move the
machine backwards.
9.
Adjust the pressure of the
brushes on the work
surface using the button.
The lit LEDs indicate the
level of pressure.
10. Begin working.
11. When you have finished
cleaning, proceed as
follows:
•
Raise the squeegee.
•
Raise the machine head.
•
Press the emergency
button.
•
Close the detergent tank
tap.
•
Put the parking brake on
by pressing the pedal
downwards and to the
right.
•
If necessary, charge the
batteries.
DAILY MAINTENANCE
Empty the dirty water drum
through the drain hose and clean
with water or water and
detergent.
Check the suction filter is
undamaged and clean.
Check the detergent tank fill filter
is undamaged and clean.
