![IP Solutions HLC-75KQ User Manual Download Page 46](http://html1.mh-extra.com/html/ip-solutions/hlc-75kq/hlc-75kq_user-manual_2088165046.webp)
38
Enable
SNMPv1/SNMPv2 Trap
for detecting the Trap server. Please set what
event needs to be detected.
Cold Start
: The camera starts up or reboots.
Settings Changed
: The SNMP settings have been changed.
Network Disconnected
: The network connection was broken down (The
camera will send trap messages after the network is connected again).
V3 Authentication Failed
: A SNMPv3 user account tries to get
authentication but failed. (Due to incorrect password or community)
SD Card Insert / Remove:
A Micro SD card is inserted or removed.
Access List (Optional)
Enable IP address filter
to allow/reject some IP address a network access. There
are two options:
single
and
range
.
Summary of Contents for HLC-75KQ
