IP Solutions HLC-75KQ, User Manual

Page: 39 / 88

31
RTSP Setting
If you have a media player that supports RTSP protocol, you can use it to
receive video streaming from the IP camera. The RTSP address can be set for
two streaming transmissions respectively.

RTSP Server : Choose Enabled or Disabled.
Disable means everyone who knows your camera IP Address can link to your
camera via RTSP. No username and password are required. Under Basic and Digest
authentication mode, the camera asks for a username and password before
allows access. The password is transmitted as a clear text under basic mode, which
provides a lower level of security than under
digest mode. Make sure your media
player supports the authentication schemes.

RTSP Port : Setup port for RTSP transmitting (Default: 554)

RTP Start and End Port : In RTSP mode, you can use TCP and UDP for connecting. TCP
connection uses RTSP Port (554). UDP connection uses RTP Start & End Port.