![IP-COM In-wall AP Series User Manual Download Page 29](http://html1.mh-extra.com/html/ip-com/in-wall-ap-series/in-wall-ap-series_user-manual_2088199029.webp)
22
5.2
DHCP Server
5.2.1
Overview
The AP provides a DHCP server function to assign IP addresses to clients on the LAN. By
default, the DHCP server function is disabled.
If the new and original IP addresses of the LAN port belong to different network segments, the system
changes the IP address pool of the DHCP server function of the AP so that the IP address pool and the new
IP address of the LAN port belong to the same network segment.
5.2.2
Configure the DHCP Server
To access the page, choose
Network
Settings
>
DHCP Server
.
This page enables you to set parameters related to the DHCP server.
If there are other DHCP servers in the network, ensure that the DHCP address pool of the AP does not
overlap with those of other DHCP servers so as to avoid address conflicts.
Parameter description
Parameter
Description
DHCP Server
It specifies whether to enable the DHCP server function of the AP. By default, it is
disabled.
Summary of Contents for In-wall AP Series
