22
7.3
Selecting the objective
Rotate the revolving nosepiece [a] to engage
the objective [b] with the magnification to be
used for observation in the light path.
When changing the objective, be careful that the objective does not clash with the
specimen. Lower the objectives with the focussing knobs before changing the
objective.
7.4
Changing between visual light path and camera light path
Set the light path selection lever to the visual
light path for using the eyepiece, or camera
light path for using a camera.
: Visual light path 100%/Camera light path
0%
: Visual light path 0%/Camera light path
100%
7.5
Focusing on the specimen
Rotate the coarse focusing knob [a] or the fine
focusing knob [b] to bring the specimen into
focus.
The same knobs are present on the other side
of the isoHub as well.
Rotating either knob in the front direction
(arrow direction) raises the objective and
rotating it in the opposite direction lowers the
objective.
Summary of Contents for isoHub
Page 1: ...2 1 0 3 isoHub user manual...
