7
Using the Radio
Selecting a radio station:
1.
Press the
Radio
button to select FM1, FM2, or AM.
2.
Press either of the
Tune/Track
buttons to select a radio station. To “seek” (jump to the next
available station), hold either button down for a few seconds until it starts to seek a station.
Saving a radio station as a preset:
1.
Press the
Radio
button to select FM1, FM2, or AM.
2.
Press either of the
Tune/Track
buttons to select a radio station.
3.
Press and hold a numeric preset button to assign the current station to that preset number. The
display will show “
SAV
” to show the station has been saved.
Recalling a saved radio station preset:
1.
Press the
Radio
button to select FM1, FM2, or AM.
2.
To use an added preset, press a preset number once lightly to go to the stored radio station.
Pairing a Bluetooth Device
1.
Turn on your Bluetooth device.
2.
Power on Explorer Extreme. When the unit is powered on, press the
Bluetooth
button to enter
pairing mode.
3.
Navigate to your Bluetooth device’s setup screen, find
Explorer Extreme
and connect.
Note:
If your Bluetooth device prompts for a pairing code, enter “
0000
”.
4.
To disconnect pairing while the Bluetooth icon is lit solid, press the
Bluetooth button.
5.
To connect to another Bluetooth device, repeat step 3.
Linking Two Speakers
1.
Press and hold the
Play/Pause/Link
button on both speakers to enter Stereo Link mode. The
word
LINK
will flash on the display while the two speakers establish a link. Once a link has been
established, the word
LINK
will appear in the display.
Note:
It may take up to 1 minute to make the connection.
2.
Once the two speakers are linked, press and release the
Bluetooth button
on either speaker to
begin the Bluetooth pairing process. The speaker you use for Bluetooth pairing will serve as the
master speaker. On its
Display
screen, the Bluetooth icon will flash to indicate that Bluetooth
pairing is in process.
3.
Navigate to your Bluetooth device’s setup screen, find
Explorer Extreme
and connect. When
your Bluetooth device is connected, the Bluetooth icon will be lit solid on the master speaker’s
Display
, and you will be able to play audio from the Bluetooth device through your two linked
speakers.
Note:
If you would like to reverse which speaker plays the left channel audio and which plays the
right channel, press and hold the
Bluetooth button
on either speaker.
4.
To unpair the Bluetooth device, press and release the
Bluetooth button
on the master speaker.
To disconnect, double press the
Play/Pause/Link
button on one of the two speakers.
