background image

Unrivaled Detect

ion.

                                              

ionscience.com/usa 

 

                                                                                                 

GasCheck Tesla Instrument User Manual V1.2R

 

 

  Page 5 of 26 

Statements   

 

 

 

 

 

 

 

 

 

 

 

 

Safety 

Please  read  this  manual  in  full  before  using  the  GasCheck  Tesla  instrument.  ION  Science  Inc  takes  no 
responsibility for damage, injury or death resulting from misuse, misunderstanding or negligence while using this 
gas detector. Please contact ION Science Inc via the address below for clarification on any aspect of this manual 
that is not understood or for additional information required. 
This instrument should only be used by qualified or competent persons with suitable knowledge of the hazards 
relating to the gases contained within equipment or in the local environment. 

 

Quality Assurance 

GasCheck Tesla instruments  are manufactured  by ION Science  Inc within an ISO 9001:2015 compliant quality 
system,  which  ensures  that  the  equipment  supplied  to  our  customers  has  been  designed  and  assembled 
reproducibly, and from traceable components. 

 

Responsibility of use 

Many gases are hazardous and can cause explosions, poisoning and corrosion resulting in damage to property 
and life. It is the responsibility of the person using this instrument to ensure it is being used in accordance with 
this manual and that the instrument is functioning correctly before use. 
The GasCheck Tesla can detect a large range of gases but some gases are more difficult to detect. 
It  is  the  responsibility  of  the  user  to  ensure  the  GasCheck  Tesla  instrument  has  the  sensitivity  to  detect  the 
required gas before reaching potentially dangerous levels. 
Inadequate performance of the gas detection equipment described in this manual may not necessarily be self-evident 
and consequently equipment must be regularly inspected and maintained.  ION Science recommends that personnel 
responsible for equipment use implement a regime of regular checks to ensure it performs within calibration limits, 
and that a record be maintained which logs calibration check data.   The equipment should be used in accordance with 
this manual, and in compliance with local safety standards.   

 

Disposal 

 

 

 

 

 

 

 

 

 

 

 

Disposal of GasCheck Telsa, its components and any used batteries shall be in accordance with local and national 
safety  and  environmental  requirements.    This  includes  the  European  WEEE  (Waste  Electrical  and  Electronic 
Equipment)  directive.  ION  Science  Inc  offers  a  'take-back'  service.  Please  contact  Ion  Science  Ltd  for  more 
information. 

 

Calibration Facility 

Ion Science Ltd offers a calibration service including the issue of a traceable certificate valid for 12 months.  A 
GasCheck  Tesla  Calibration  Kit  offers  a  means  of  checking  and  calibrating  the  instruments  against  a  known 
reference,  however  ION  Science  Inc  strongly  recommend  the  instrument  is  returned  to  an  approved  service 
centre on an annual basis for general maintenance and calibration. 

 

Legal Notice 

While every attempt is made to ensure the accuracy of the information contained in this manual, Ion Science accepts 
no liability for errors or omissions, or any consequences deriving from the use of information contained herein.  It is 
provided "as is" and without any representation, term, condition or warranty of any kind, either express or implied. To 
the extent permitted by law, Ion Science shall not be liable to any person or entity for any loss or damage which may 
arise from the use of this manual.  We reserve the right at any time and without any notice to remove, amend or vary 
any of the content which appears herein. 
 
 
 
 
 
 
 
 

Summary of Contents for GasCheck Tesla



























Reviews: