Iomega px4-400d User Manual Download Page 153 | Manualshive

Page: 153 / 168

background image

Energy Saving

The Energy Saving feature provides power settings for the px4-400d.

Power Down Drives

Click the Power Down Drives drop-down menu to select how much idle time should be allowed to elapse
before the px4-400d powers down the drives. Drives automatically power back up when the px4-400d
accesses them. You may notice a slight delay when the drives are accessed.

Brightness

To adjust the brightness of the lights on the px4-400d, set the Indicator Brightness to High, Medium, or
Low.

Wake On LAN

Wake On LAN powers on your px4-400d when a specific signal is sent over the network. Additional
software may be required to send the Wake On LAN signal to your device.

1. Check the Wake On LAN checkbox to enable Wake On LAN.

2. Click Apply to save your changes.

Creating a Power Schedule

You can create a power schedule for your px4-400d. This allows you to set daily times to automatically
power off and/or power on the device.

1. Check the box next to Enable device power schedule.

2. Check the boxes for Power Off and/or Power On.

3. Set the power schedule time in both hours and minutes (HH:MM), and specify AM or PM.

4. Click Apply to save your changes.

Hardware Management

143

Energy Saving

«
...
151
152
153
154
155
...
»

Summary of Contents for px4-400d









































































































































































Reviews:

No comments

Related manuals for px4-400d

Brand: 4RF Pages: 7

Brand: Xinje Pages: 76

Brand: Watchguard Pages: 39

Brand: NETGEAR Pages: 2

Brand: Delta Tau Pages: 74

Surround Dongle

Brand: Sennheiser Pages: 18

IBOX-BAC Series

Brand: IntesisBox Pages: 2

WRT54GR - Wireless-G Broadband Router

Brand: Linksys Pages: 81

Brand: Barco Pages: 30

Hotwire 8775 MSDSL

Brand: Paradyne Pages: 10

EdgeRouter PoE ERPoe-5

Brand: Ubiquiti Pages: 13

LMP-1202G-SFP Series

Brand: ANTAIRA Pages: 19

Brand: Alarm Pages: 5

FiberTwist G6426

Brand: Genexis Pages: 9

Disc Publisher XR

Brand: Primera Pages: 2

Brand: Juniper Pages: 420

PFC Chokes PFC3515V Series

Brand: Delta Electronics Pages: 1

Brand: JAKA Pages: 37

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands