manualshive.com logo in svg

Ioline CrystalPress, User Manual

Share
Download
Ioline CrystalPress User Manual Download Page 46

46

Ioline CrystalPress User Guide

Customer Service

Ioline Corporation is committed to providing quality service and 

support to our customers. If you need assistance with an Ioline prod-

uct, contact us:

Ioline Customer Service Department

Monday through Friday

7:00 A.M. - 5:00 P.M. U.S. Pacific Time

Voice: 1.425.398.8282

Fax: 1.425.398.8383

[email protected]

http://www.ioline.com/support/

Any 

warranty servicing of this product not specifically described 

in this manual must be authorized in writing by Ioline Customer 

Service.

 You may obtain service by calling or faxing Ioline Customer 

Service. The technicians will help determine the nature of the prob-

lem. If factory repair is necessary, you will receive a RMA (Return 

Material Authorization). Please gather the information indicated on 

the next page before contacting Ioline.
1. 

When returning a machine, carefully package the equipment 

in its original container or packaging equivalent. You may 

purchase shipping containers by contacting Ioline Customer 

Service. 

Ioline is not responsible for any damage due to inad-

equate or improper packaging.

2. 

Carefully wrap and secure all items in the shipping container to 

prevent damage. Seal the container and note the RMA number 

near the address block.

3. 

Ship the container using FED-EX or another approved carrier. 

COD shipments ARE NOT ACCEPTED. An Ioline representa-

tive will contact you prior to the start of work with an estimate 

of repair cost. All repairs are warranted for 90 days.

Send Your Comments

Ioline Corporation is interested in comments on our products,  docu-

mentation and service. Please send corrections or suggestions to:

Ioline Corporation

14140 NE 200th Street

Woodinville, WA 98072 USA

Voice: 1.425.398.8282

Fax: 1.425.398.8383

[email protected]

http://www.ioline.com

The 

CrystalPress

 

User Guide

 

is provided for informational purposes 

only. The contents are subject to change without notice, and Ioline 

Corporation assumes no responsibility for any errors that are con-

tained herein. No part of the 

CrystalPress

 

User Guide 

may be copied, 

disseminated, or distributed without the express written consent of 

Ioline Corporation.

Summary of Contents for CrystalPress

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands