32
Ioline CrystalPress User Guide
Remove the Motif
When the motif is finished, lift the
Pinch
Wheels
then remove the motif from the
CrystalPress
.
1
Check the Motif
Inspect the motif to ensure that no stones
were placed upside down or fell off during
the process of removal.
2
Prepare to Print
Press the
Print/Pause
key so the
Status
light
is red. Move the
Transfer Sheet
with
Arrow
k
eys to position where the motif will start.
4
CrystalPress Ready
Press the
Reset
key on the
Keypad
to set the
beginning point for the motif. The
Status
light will turn green.
5
Print Motif
Press the ‘GO’ button in
CrystalStudio
. The
CrystalPress
will make the motif to match
what is displayed in
CrystalStudio
.
6
Produce the Motif (continued)
Transfer the Motif
Pre-Heat the heat press
Set the heat press temperature and pres-
sure that is appropriate for the stone size
and material then turn on to pre-heat.
3
Pre-Heat the Material
Line the heat press
Platen
with a
Protective
Sheet
then place the material on the
Platen
.
Pre-heat the material for 5-10 seconds.
4
Position the Motif
Remove the cover sheet from the motif (if
used). Position the motif on the material
making sure adhesive side is down.
5
