18
Ioline CrystalPress User Guide
Assemble and Install the C-Stick
The
Carriage
moves Rhinestones and crystals from the sorters to the
Transfer Sheet
with the
C-Stick
tool. It is important to keep the CP-I
C-Stick Tip
clean and working properly to ensure the fastest through-
put and trouble free operation of the
CrystalPress
. See the
Mainte-
nance
chapter for more information on proper care of the
C-Stick
tool.
The
Troubleshooting
chapter has hints for identifying and resolving
issues related to the
C-Stick
.
Turn off power then use the following steps to install the
C-Stick
into
the
Carriage
.
Step 2: Insert the C-Stick in the Carriage Jaw
Loosen the
Carriage
Thumbscrew
by turning it counter-clockwise. Ro-
tate the clamp out of the way then insert the
C-Stick
into the
Carriage
as shown. Ensure the flange on the tool slips into the slot in the jaw.
Install the
Figure 18.
C-Stick
Tip onto the
C-Stick
Body.
Step 1: Install C-Stick Tip on the C-Stick Body
Remove a
C-Stick Tip
and the
C-Stick Body
from the protective bags.
Install the tip on the body by rotating counter clockwise as shown.
Do not overtighten the tip as it
will make later removal difficult.
Note
i
C-Stick Body
C-Stick Tip
Insert the
Figure 19.
C-Stick
in the
Carriage
.
Carriage
Thumbscrew
Clamp
C-Stick
(CP-II shown)
Slot in Jaw
Flange
