Start Here!
Package Contents
Overview
Requirements / Pre-Cautions
- 1 x Mobile Pocket Power
- 1 x USB charging cable
- 1 x Mini USB connector
- 1 x USB type A connector
- 1 x USB type A female connector
- 1 x Samsung connector
- 1 x LG connector
- 1 x QSG
- 1 x Warranty/Registration Card
About Us
About Us
FUN
IOGEAR offers connectivity solutions that are innovative, fun, and
stylish, helping people enjoy daily life using our high technology
products.
GREEN
IOGEAR is an environmentally conscious company that emphasizes
the importance of conserving natural resources. The use of our
technology solutions helps reduce electronic waste.
HEALTH
IOGEAR supports healthy and fit lifestyles. By integrating products with
the latest scientific developments, IOGEAR’s solutions enhance the life of
end-users.
© 2007 IOGEAR, INC.
Mobile Pocket Power
Quick Start
Guide
GMP1001B
PART NO. Q0343
Warranty
Contact
IN NO EVENT SHALL THE DIRECT VENDOR'S LIABILITY FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE
USE OF THE PRODUCT, DISK, OR ITS DOCUMENTATION EXCEED THE PRICE
PAID FOR THE PRODUCT.
The direct vendor makes no warranty or representation, expressed, implied, or
statutory with respect to the contents or use of this documentation, and especially
disclaims its quality, performance, merchantability, or fitness for any particular
purpose.
The direct vendor also reserves the right to revise or update the device or
documentation without obligation to notify any individual or entity of such revisions,
or updates. For further inquiries please contact your direct vendor.
Toll Free 866-9-IOGEAR (USA)
Phone: 949-453-8782
23 Hubble
Irvine, CA 92618 USA
www.iogear.com
[email protected]
FAQ
Product Features
Problem Description Possible Cause
Solution
A. No response after
device connected.
B. Mobile Pocket
Power can not
be charged.
C. Mobile Pocket
Power can not
supply the device
with power and the
indicator light is off
when the ‘check’
button is pressed.
1. Need to activate
charging
2. Voltage not supported
by device
3. Improper connection
between Mobile Pocket
Power and your device
4. Wrong connector
5. Damaged charging
cable or connector
6. Circuit problem in
Mobile Pocket Power
1. Improper connection
between charging
Mobile Pocket Power
2. Charger is damaged
1. Electricity of the Mobile
Pocket Power is too low
1. Check the connection and
reconnect
2. Contact local retailer for
repair
1. Charge the Mobile Pocket
Power
1. Press the Check button
to activate charging
process
2. Refer to the device QSG
3. Check the connection;
make sure connector
inserts correctly
4. Make sure the connector
matches your portable
device
5. Change charging cable
or connector
6. Contact local retailer for
repair or exchange
D. Electricity of the
Mobile Pocket
Power runs out
quickly.
1. Mobile Pocket Power
not charged before use
2. Original charger not
being used
1. Charge the Mobile Pocket
Power according to the
manual until the charging
LED turns solid
2. Use the original charger
otherwise it may damage
your Mobile Pocket Power
Charging Mobile Pocket Power
1. Connect the Mini USB connection end of the USB charging cable to the
GMP1001B.
2. Plug the USB type A connector to the female port of the USB charging cable.
3. Connect the USB type A connector end to any available USB port of your
computer.
4. When the GMP1001B starts to recharge, the LED on the device will flash blue
light and all four blue lights will remain ON when GMP1001B is fully charged.
Using Mobile Pocket Power to charge device
1. Connect the Mini USB connection end of the charging cable to GMP1001B.
2. Select the appropriate connector that fits in your mobile device and plug it into
the female port of the USB charging cable, as shown below.
3. Press the Check button to activate the charging process.
Mini USB Input/Output
Computer:
Available USB connectivity
Make sure the Voltage of your device ranges between 5V to 6V
Before using this product, please read the following precautions carefully and
follow them. Incorrect use of Lithium-Ion batteries may lead to dangers such as
heating, cracking, fuming, and catching fire. Such as battery heating, cracking,
fuming, and catching fire. The battery performance may also be damaged.
•
This product is a precise electronic product. Do not disassemble, refit or
re-combine it by yourself
•
Please do not throw, knock, shake or strike the Mobile Pocket Power
•
Please do not put the Mobile Pocket Power in water
•
Please do not place or carry inflammable, explosive and hazardous articles near
the Mobile Pocket Power
•
Only use the special power re-charger provided by the manufacturer otherwise
battery damage can occur
•
Please place the Mobile Pocket Power at room temperature
•
Keep reach away from children
•
Do not connect the positive pole (+) to the negative pole (-)
•
When you choose to discard this product and its accessories, do so in
accordance with your local environmental protection laws and regulations
• Works with iPhone and most iPod products
• Designed to fully charge PDAs, mobile phones, Bluetooth headsets,
MP3’as and more
• Charges iPod nano 2nd generation or newer, iPod 4th generation or
newer, iPod Touch, and iPhone
• Charges your device up to two times** with one fully charged Mobile
Pocket Power
• Supplier up to 1600 charges
• Automatically adjusts voltage for efficient charge time
• LED battery capacity indicator
Checking charge of Mobile Pocket Power
Press the Check button to see the energy level left in the Mobile Pocket Power.
Performance Parameters
• Type of battery: Lli-Polymer
• Rated input: 1000mAh max.
• Input power: 4.5V ~ 6.5V
• Rated output: � 600mAh max.
• Output power: DC 5.3 ± 0.2V
• Cycle life: � 800 times
• Overall size: 3.86 x 2.05 x 0.35 (inch)
• Product weight: 0.13 lb
Connector�� IOGEAR Part No.
Operating Procedures
GMPT003MU
GMPT075UM
GMPT076UF
GMPT059SS
GMPT075UM
Charging your iPod and iPhone
1. Connect the Apple USB 2.0 charging cable to your iPod or iPhone.
2. Plug the USB type A female connector to the female port of the USB charging
cable and connect the mini USB end to the GMP1001B as shown below.
3. Connect the Apple USB 2.0 charging cable to the GMP1001B charging cable
4. Press the Check button to activate the charging process. Your iPod or iPhone
will start to recharge and display the charging status.
*Some models may require the use of a different connector available at www.iogear.com
**It depends on the battery capacity of specific models
1. Motorola / Blackberry / Mini-B USB
2. USB Type A
3. USB Type A Female
4. Samsung Phone*
5. LG Phone*
LED indicator
Check button
GMPT075UM
Desktop or laptop
GMPT076UF
Some models may require the use of
a different connector available at
www.iogear.com
