background image

 

  3 

 

 

 

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT: This equipment has been tested and 
found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against harmful interference in a residential installation. Any changes 
or modifications made to this equipment may void the user’s authority to operate this equipment. This 
equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with 
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio 
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to 
try to correct the interference by one or more of the following measure:  

 

Reorient or relocate the receiving antenna 

 

Increase the separation between the equipment and receiver 

 

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected 

 

Consult the dealer or an experienced radio / TV technician for help. 

FCC Caution

: Any changes or modifications not expressly approved by the party responsible for compliance 

could void the user's authority to operate this equipment. 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 

(1)

 

this device may not cause harmful interference, and 

(2)

 

this device must accept any interference received, including interference that may cause undesired 
operation 

RoHS 

This product is RoHS compliant. 

 

 

 

 

 

FCC Information 

Summary of Contents for GCS1212TAA3





















Reviews: