12
Hardware Setup
Mounting
IOGEAR’s UPS unit can be either desktop mounted (vertically or horizontally) or rack mounted
(in a 19” rack chassis)
Rack Mount
A rail slide kit and rack mounting kit is provided in the package for rack mounting. The rail slide
kit is installed on the rack and the rack mounting kit installs the UPS to onto the rack. To mount
the UPS, please follow below steps:
1. Make sure that the rail slide kit includes all of the components, shown in the diagram below.
The components include:
2 x slide rails (1 for each side, indicated by L and R in the diagram below)
6 x M6 nuts
4 x fixing studs
8 x M6 screws
2.
Insert the 4 fixing studs: two screw holes are available on both ends of a slide rail. Screw a
fixing stud into the top screw hole as shown below.
Summary of Contents for GBB1000N
Page 2: ......
Page 52: ... 2020 IOGEAR ...
