ioCorp ProEdge-A100 thin client, Installation Manual

Page: 21 / 30

Setting Up Your ProEdge-A100
Positioning Your ProEdge-A100
11
2.1 Positioning Your ProEdge-A100
There are two ways to position your ProEdge-A100:
• Put it (with its stand) on a desk or a desired place uprightly .
• Mount it on the back of a monitor using a VESA mount kit.
To mount your ProEdge-A100 on the back of a monitor, please follow the steps below:
Step 1: Remove the Stand from Your ProEdge-A100
Step 2:
Understand Your Stand / VESA Mount Kit for ProEdge-A100
Step 3: Store Away Screws inside the Bracket
Step 4:
Remove Screws from the Bracket
Step 5: Mount Your ProEdge-A100
Step 1: Remove the Stand from Your ProEdge-A100
To remove the stand from your ProEdge-A100, please do the following:
1. Place your ProEdge-A100 on a flat surface with the stand side upward.
2. Remove the screw that fixes the stand to your ProEdge-A100.
3. Store away the removed screw inside the stand. Detailed instructions will be
provided in
Step 2
and
3
.
NOTE
• It’s highly recommended to store screws away inside the stand when not needed
to prevent them getting lost.
台灣製造
/ 台湾制造
/ Made in
Taiwan
JPAA
Manufactur
er : Atrust Compu
ter Corp.
製造商
: 冠信電腦股
份有限公司
制造商
: 冠信电
脑股份有限公司
Model Name
: Thi n Client
產品名稱
: 精簡型電腦
产品
名称
: 精致
型电脑
Model
/
型號 / 型号
: Atrust t62
Inpu
t/ 輸入 /
输入 : +5V 3A