Goodrive350A series high-performance multifunction VFD
Function parameter list
-221-
Function
code
Name
Description
Default
value
Modify
running frequency is higher than that, the
phase-locked loop is enabled.
Setting range: 0.00
–655.35
P13.10
Reserved
P13.11
Maladjustment
detection time
Used to adjust the responsiveness of
anti-maladjustment function. If the load inertia
is large, increase the value of the function
code properly, however, the responsiveness
may slow down accordingly.
Setting range: 0.0
–10.0s
0.5s
○
P13.12
High-frequency
compensation
coefficient of SM
The function code is valid when the motor
speed exceeds the rated speed. If motor
oscillation occurred, adjust the function code
properly.
Setting range: 0.0
–100.0%
0.0%
○
P13.13
High-frequency
injection current
0
–300.0%
20.0%
◎
P13.14
–
P13.19
Reserved
P14
—
Serial communication function
Function
code
Name
Description
Default
value
Modify
P14.00
Local
communication
address
Setting range: 1
–247
When the master writes the slave
communication address to 0 indicating a
broadcast address in a frame, all the salves
on the Modbus/Modbus TCP bus receive the
frame but do not respond to it.
Local communication address is unique in the
communication network, which is the basis for
point-to-point communication between the
upper computer and the VFD.
Note:
The communication address of a slave
cannot be set to 0.
1
○
P14.01
Communication
baud rate
Used to set the data transmission speed
between upper computer and the VFD.
4
○
