INVT GD10-0R2G-2-B, Operation Manual

Page: 16 / 125

Goodrive10 Series Mini VFD Installation guidelines
-11-
3 Installation guidelines
The chapter describes the mechanical installation and electrical installation.

Only qualified electricians are allowed to carry out what described in this
chapter. Please operate as the instructions in chapter 1 "Safety
precautions". Ignoring these may cause physical injury or death or
damage to the devices.

Ensure the power supply of the VFD is disconnected during the
operation. Wait for at least the time designated until the POWER
indicator is off after the disconnection if the power supply is applied.

The installation and design of the VFD should be complied with the
requirement of the local laws and regulations in the installation site. If
the installation infringes the requirement, our company will exempt from
any responsibility. Additionally, if users do not comply with the
suggestion, some damage beyond the assured maintenance range may
occur.
3.1 Mechanical installation
3.1.1 Installation environment
The installation environment is the safeguard for a full performance and long-term stable
functions of the VFD. Check the installation environment as followings:
Environment Conditions
Installation
site
Indoor
Environment
temperature

-10°C
–+40°C, and the temperature changing rate is less than
0.5°C/minute.

If the ambient temperature of the VFD is above 40°C, derate 1% for
every additional 1°C.

It is not recommended to use the VFD if the ambient temperature is
above 60°C (empty load).

In order to improve the reliability of the device, do not use the VFD if
the ambient temperature changes frequently.

Please provide cooling fan or air conditioner to control the internal
ambient temperature below the required one if the VFD is used in a
close space such as in the control cabinet.

When the temperature is too low, if the VFD needs to restart to run
after a long stop, it is necessary to provide an external heating
device to increase the internal temperature, otherwise damage to