INVT 11020-00136, Operation Manual

Page: 312 / 424

Goodrive600 series high-performance multifunction VFD Function parameter list
-304-
Function
code
Name Description Default Modify
2: Coast to stop
3: Decelerate to stop in emergency manner
P14.33
Number system of
control and status words
for communication cards
0: Decimal system
1: Binary system
Note: The rectifier unit and inverter unit must be
the same in the value of the function parameter.
0
○
P14.35
Enabling the jog mode
through local keypad
0: Disable
1: Enable
Note: Invalid when a LCD keypad is
connected.
0
○
P14.35
–
P14.40
Reserved 0
–65535
0
●
P15 group
––Functions of communication card 1 (PROFIBUS-DP)
Function
code
Name Description Default Modify
P15.00 Reserved 0
–65535
0
●
P15.01 Module address 0
–127
2
◎
P15.02 Received PZD2 0: Disable
1: Set frequency (0
–Fmax (Unit: 0.01Hz))
2: PID reference (0
–1000, in which 1000
corresponds to 100.0%)
3: PID feedback (0
–1000, in which 1000
corresponds to 100.0%)
4: Torque setting (-3000
–+3000, in which 1000
corresponds to 100.0% of the motor rated
current)
5: Setting of the upper limit of forward running
frequency (0
–Fmax, unit: 0.01 Hz)
6: Setting of the upper limit of reverse running
frequency (0
–Fmax, unit: 0.01 Hz)
7: Upper limit of the electromotive torque (0
–
3000, in which 1000 corresponds to 100.0% of
the motor rated current)
8: Upper limit of braking torque (0
–2000, in which
1000 corresponds to 100% of the motor rated
current)
9: Virtual input terminal command.
Range:0x000
–0x1FF
10: Virtual output terminal command. Range:
0x00
–0x0F
11: Voltage setting (special for V/F separation)
(0
–1000, in which 1000 corresponds to 100% of
the motor rated voltage)
12: AO1 output setting 1 (-1000
–+1000, in which
1000 corresponds to 100.0%)
13: AO2 output setting2 (-1000
–1000, in which
0
○
P15.03 Received PZD3
P15.04 Received PZD4
P15.05 Received PZD5
P15.06 Received PZD6
P15.07 Received PZD7
P15.08 Received PZD8
P15.09 Received PZD9
P15.10 Received PZD10
P15.11 Received PZD11
P15.12 Received PZD12