INVOLAR Corporation, Ltd.
Manual version 1.12
INVOLAR Corporation Ltd. Mar. 2016
36
Before cleaning the inverter:
Wear gloves and safety glasses.
Isolate the DC supply to the inverter.
Isolate the AC supply to the inverter.
Wait for 45 minutes to ensure and positively charged components
have discharged.
Clean the inverter casing with a damp cloth carefully.
Check for any signs of corrosion or defects to the casing, cabling and
cable connector.
Reinstall the inverter following the installation steps.
Overview
The application of power line communication technology in INVOLAR MAC500
Micro-Inverter enables the users to monitor and maintain the whole PV system
through the internet. By visiting INVOLAR’s website and entering the SEDAS
portal(Solar Energy Data Acquisition System) customers can track real time
statistics information of the energy harvest. Monitoring per module performance
data enables easy maintenance and fast and effective fault finding.
Figure 8-1 invo
2
Micro-Inverter Communication System
MAC500 MICRO-INVERTER Status LED Indications and Error Reporting
You can access the INVOLAR MAC500 Micro-Inverter system LED menu
to detect the operation conditions. MAC500 MICRO-INVERTER Status
LED indications and error report shows as below Table (8-2)
LED Operation
Working Mode
short red blinks
Startup
Flashing green continuously
Producing power and communicating
with eLog2.0
Flashing red continuously
Fault
Table8-2MAC500 MICRO-INVERTER Status LED Indications and Error