Invivo Millennia 3155A, Service Manual

Page: 27 / 76

2-7
(3) Turn the Rotary Knob until the correct YEAR is displayed.
(4) Press the Rotary Knob to accept the YEAR setting.
k. Turn the Rotary Knob to highlight the ENTER menu selection.
l. Press the Rotary Knob to save the changes performed.
m. Turn the Rotary Knob to highlight the RETURN menu selection.
n. Press the Rotary Knob to return to the
SETUPS
Menu.
o. Press the NORMAL SCREEN Control Key to return the monitor to the operational
display.
2.6 Store and Recall Setups. Perform the following procedure to verify the proper operation
of the Store and Recall Setups feature (performing this test may change all stored setups):
a. Press the SETUP Control Key.
b. Turn the Rotary Knob to highlight the PARAMETER menu selection.
c. Press the Rotary Knob to select
PARAMETER
.
d. Turn the Rotary Knob to highlight the
TEMP
selection.
e. Press the Rotary Knob to select TEMP .
f. Turn the Rotary Knob to highlight the ON menu selection.
g. Press the Rotary Knob to select ON .
h. Press the SETUP Control Key.
i. Turn the Rotary Knob to select the
STORE SETUPS
menu selection.
j. Press the Rotary Knob to select STORE SETUPS .
k. Turn the Rotary Knob to highlight the A menu selection.
l. Press the Rotary Knob to select A .
m. Turn the Rotary Knob to highlight the YES menu selection.
n. Press the Rotary Knob to select
YES
.
o. Turn the front panel power switch Off, wait 5 seconds and then turn the front panel
power switch On.
p. Once the Normal Screen appears, press the
SETUP
Control Key.
q. Turn the Rotary Knob to highlight the RECALL SETUPS menu selection.
r. Press the Rotary Knob to select RECALL SETUPS .