Version 3.07
| Optidrive Eco User Guide |
33
www.invertekdrives.com
Switching Frequency
Reduction
Mains Loss
Maintenance
Time Elapsed
TFT and OLED Display :
ECO 01 ECO 01 ECO 01
SF
23.7Hz
ML
23.7Hz
23.7Hz
15.3A
15.3A
6.9kW
15.3A
6.9kW
Switching frequency is
reduced, due to high heatsink
temperature.
The incoming mains
power supply has been
disconnected or is missing.
The user programmable
maintenance reminder time
has elapsed.
5.4. Changing Parameters
TFT and OLED Display :
ECO 01 ECO 01 ECO 01 ECO 01 ECO 01
Stop
P1-01
P1-08
30.0A
P1-08
Stop
15kW 400V 3Ph 50.0Hz
30.0A
P1-08
30.0
3.0 30.0A
15kW 400V 3Ph
Press and hold the
Navigate key > 2
seconds.
Use the Up and Down
keys to select the
required parameter.
Drives with OLED
display will show the
present parameter
value on the lower
line of the display.
Press the Navigate
key for < 1 second.
Adjust the value using
the Up and Down
keys. Drives with
OLED display will
show the maximum
and minimum possible
settings on the lower
line of the display.
Press for < 1 second
to return to the
parameter menu.
Press for > 2 seconds
to return to the
operating display.
5
LED K
eypad and Display Operation
