Name
Description
action
Flag – meaning according to value:
•
1 – RFID tag proximity when controlled by protocol (HTTP/...),
•
2 – action for the card stored in the device memory,
•
4 – action for unknown/inactive card,
•
8 – action for hold card function,
•
16 – action for remove card function.
src
reserved
timestamp/ts
Time in the form of timestamp
time
Time of occurrence of the event
date
Date of occurrence of the event
userId
User ID number in the card memory. A value of 65535 indicates an
unknown or inactive card
uid
UID of the read RFID tag
name1
Name field value from card memory
name2
Surname field value from card memory
You can delete the logs by clicking the Remove logs button or use HTTP command.
7.8
Card action
The most important settings for the operation of the reader and its response to the
application of an RFID tag are available at
Card action
page. The user can configure
settings such as:
•
output control,
•
type and content of the HTTP request,
•
MQTT payload content,
•
event logging,
•
message on the display/ LED response,
•
beeper control.
7.8.1 Action settings
The main tab of the
Card action
page, where you can define the reader's response to
card application and configure basic card handling functions.
Enable card log
enable the main function of event logging. Note that the choice of
which events to log should be defined separately.
Action hold time
– the time after which the reader will start executing the settings
defined for the
Action hold card
tab
(chapter 7.8.4).
User manual RFID IND2
Page
26
of
61
[B01]
