inventum IVW6040A, User Manual

Page: 49 / 108

7. Install the main filter into the micro filter. Make sure that the markers are aligned.
8. Install the main filter into the sieve.
9. Turn the main filter clockwise to fasten it.
Caution:
Make sure that the filters are placed correctly. Incorrect placement of the filters affects the maximum
performance of the appliance.
CLEANING THE SPRAY ARMS
1. Remove the upper and lower basket.
2. Remove the nut (A).
3. Remove the upper spray arm (B).
4. Pull the lower spray arm (C) upwards to remove it.
5. Clean the spray arms. Use warm water.
6. Install the lower spray arm (C).
7. Install the upper spray arm (B).
8. Tighten the nut (A).
7 Extra information
LED INDICATOR
LED indicator State of the appliance
Red, continuous The appliance is running a program.
Red, flashing A program is cancelled.
Red, flashing rapidly The appliance has an error. Refer to section
'Fault
codes'
.
Green, continuous A program is finished.
Note:
The LED indicator does not operate when the door of the appliance is opened.
WATER HARDNESS LEVEL SETTINGS (SALT CONSUMPTION)
Level German hardness
[dH]
French hardness
[dF]
British hardness [dE] Display indicator
1 0-5 0-9 0-6 L1
2 6-11 10-20 7-14 L2
3 12-17 21-30 15-21 L3
4 18-22 31-40 22-28 L4
5 23-31 41-55 29-39 L5
6 32-50 56-90 40-63 L6
(Figure 21)
(Figure 22)
(Figure 23)
English • 49