STOPPING THE APPLIANCE
Note:
The appliance is silent for 40 to 45 minutes during the drying process.
Note:
A buzzer sounds five times and the ready indicator is on when a program is finished.
1. Open the door.
2. Wait a few minutes before you unload the appliance. The dishes are very hot and can break.
3. Push the on/off button to switch off the appliance.
6
Cleaning and maintenance
CLEANING THE APPLIANCE
Caution:
Make sure that the appliance is off.
Note:
If you clean the appliance regularly, it will improve the service life.
1. Clean the outside of the appliance. Use a damp cloth.
2. Clean the seals of the door. Use a soft cloth.
3. Clean the inside of the appliance in case of high contamination:
a. Fill the detergent reservoir with a special cleaning agent for dishwashers.
b. Select a program with a high temperature.
c. Start the program.
CLEANING THE FILTERS
The filter system of the appliance consists of three components: the main filter, the micro filter and the sieve.
Clean the filters weekly.
Warning:
Do not use the appliance without the filter system.
Note:
Clean filters make sure that your appliance functions correctly.
1. Remove the lower basket.
2. Turn the main filter (A) counter-clockwise to remove it.
Note:
The micro filter is attached to the main filter.
3. Remove the main filter (A) from the micro filter (B).
4. Remove the sieve (C).
5. Clean the main filter, the micro filter and the sieve. Use warm water and a dishwasing brush.
6. Install the sieve.
(Figure 20)
(Figure 21)
(Figure 22)
English
•
45