inventum IOP6272BK, User Manual

Page: 33 / 96

Item Function
Function indicator To show the selected function (timer, quick preheat,
defrost, temperature sensor, delayed start, dough
proving, light).
Oven indicator To show the available and selected oven functions.
Refer to section 'Oven modes' .
Clock
• To show the remaining time during operation.
• To show the current time when the appliance is off.
Temperature indicator To show the selected temperature.
Adjustment knob To adjust the settings.
Turn the knob to the right to increase the setting.
Turn the knob to the left to decrease the setting.
Start/pause button To start or pause the appliance.
Lamp button To activate/deactivate the lamp inside the appliance.
Temperature button To select the temperature.
Clock button To set the clock.
Quick-preheat button To select the quick-preheat function.
Delayed-start button To select the delayed-start function.
Timer/child-lock button To use the timer or to activate/deactivate the child lock.
Cancel button To cancel a function or program.
Oven function knob To select an oven mode.
4 Installation
SAFETY INSTRUCTIONS FOR INSTALLATION
• Safety during use can only be guaranteed if installation was done correctly and according to the instructions. The
installer is liable for damage caused by incorrect installation.
• The electrical installation must be carried out by a qualified electrician. The electrician must comply to national
and local regulations.
• The appliance has protection class I and may only be used in combination with an earthed connection.
• The appliance must be connected to a permanent installation in which provisions for switching off are integrated,
in accordance with the installation instructions.
• Make sure that the mains cable does not get jammed during installation or is running along sharp edges. The
mains cable must be placed in such a way that no contact is made with hot parts of the appliance.
• The connection point, mains socket and/or mains plug must always be accessible.
• The kitchen furniture in which the appliance is installed must be heat resistant to at least 90°C. This also applies
to the doors or front of the furniture.
• Make sure that the kitchen furniture in which the appliance is installed is firmly attached, for example by fastening
the furniture to adjacent elements.
• In case of incorrect installation or connection the warranty becomes invalid.
• Changes to the appliance, including replacing the mains cable, must be carried out by a certified installer.
• Make sure that there is sufficient ventilation and fresh air around the appliance.
English • 33