32
OPERATION
32
MZ-Home | Operating instructions
4.11
Define output levels
In the
output levels
submenu, you can redefine the preset fan speed (
ard settings) for each output level.
Three output levels can be set for each of the operating modes heat recovery and ventilation.
When the dehumidification function is triggered, a output level can be defined.
The percentage allocation of the output levels depends on the ventilation concept that was
created for you. The setting is possible between 25 % and 100 % in 5 % steps.
Change output levels for heat recovery and ventilation
►
Touch the navigation arrow
.
The
output level
submenu
is called up.
►
Touch the navigation arrow
until the
output
levels
menu item is displayed.
►
Touch the navigation arrow
/
to increase / decrease the fan speed in 5 %
steps.
►
Touch the navigation arrow
to confirm the
selection.
The flashing stops.
You have set the output levels for heat
recovery and ventilation.
►
Use the navigation arrow
/
to select the output level you want to set.
(for example level 2).
The marker arrow > points to the level.
►
Touch the navigation arrow
.
The currently set fan speed
flashes.
Ventilation level 1:
Ventilation level 2:
Ventilation level 3:
Pause / Off:
no bar
i
Requirements:
• You are in the settings main menu.
> o u t p u t l e v e l s
= 2 5 %
= 3 5 %
= 6 0 %
s e t t i n g s
> o u t p u t l e v e l s
o u t p u t l e v e l s
= 2 5 %
> = 5 0 %
= 6 0 %
o u t p u t l e v e l s
= 2 5 %
> = 3 5 %
= 6 0 %
