27
OPERATION
27
MZ-Home | Operating instructions
4.7 Activate/deactivate external interface
In the
inputs
submenu, the interface for optional sensors, e. g. the optionally available CO
2
sen-
sor, can be activated and deactivated on the Clust-Air module.
The following table gives an overview of which input is selected for which sensor.
Sensor (optional)
Input
Building management system
Analogue
Pressure sensor (opener or closer possible)
Fireplace switch
CO
2
sensor
Ext. switch
VOC sensor
Ext. switch
If a pressure sensor is installed and the input
fireplace switch
is selected, it must also be set
whether it is a normally closed contact (NC) or normally open contact (NO).
Activate interface
►
Touch the navigation arrow
.
The
Inputs
submenu is called up.
►
Use the navigation arrow
to select the zone
whose interface is assigned
(for example, zone 2).
►
Touch the navigation arrow
until the menu item
Inputs
is displayed.
►
Use the navigation arrow
to select the corre-
sponding input.
You have activated the interface.
Requirements:
• You are in the settings main menu.
• The external interface is assigned.
i
> i n p u t s
z o n e 1 < o f f >
i n p u t s
> z o n e 2 < a n a l o g u e >
s e t t i n g s
> i n p u t s
i n p u t s
> z o n e 2 < f i r e p l . s w . >