inVENTer MZ-Home Operating Instructions Manual Download Page 21

Page: 21 / 44

OPERATION

MZ-Home | Operating instructions

4.4 Change language

Six languages are available on your MZ-Home controller. German is the default language at the

factory. Further languages can be retrofitted. Contact your factory representative if necessary.

Requirements:

• You are in the settings main menu.

►

Touch the navigation arrow



until the

language

menu item is displayed.

►

Touch the navigation arrow





The

language

submenu is called up.

►

Touch the navigation arrow





The marker arrow > points to the currently set

language.

►

Use the navigation arrow



to select the desired

language (e.g. English).

►

Confirm the selection (e.g. English) with the

navigation arrow





The marker arrow > points to the menu item

language



The selected language is set.

►

Touch the navigation arrow



to return to the settings menu.



You have changed the language setting.

> S p r a c h e

  <   D e u t s c h                 >

S p r a c h e

> < D e u t s c h >

> l a n g u a g e

  <   e n g l i s h                 >

s e t t i n g s

> l a n g u a g e

Summary of Contents for MZ-Home













































Search results

Summary of Contents for MZ-Home

Reviews:

Related manuals for MZ-Home

Brands by name

Popular brands

inVENTer MZ-Home, Operating Instructions Manual

Search results

Summary of Contents for MZ-Home

Reviews:

Related manuals for MZ-Home

Brands by name

Popular brands