18
OPERATION
18
MZ-Home | Operating instructions
►
Use the navigation arrow
to select the menu
item
mode
.
The
operating mode indicator
flashes.
►
Touch the navigation arrows
/
,
to set the operating mode.
►
Use the navigation arrow
to select the menu
item
interval
.
The
interval indicator
flashes.
►
Touch the navigation arrows
/
,
to set the interval for which manual override is
used.
Manual control is active; the 7-day timer settings
are inactive for the selected duration of the
override.
If the Pause function is selected (display off), the MZ-Home switches back to the previously
passed operating mode (not the previously active/set one) after the selected interval has elapsed!
Select the Pause function mode:
• with the navigation arrow
so that the MZ-Home controller switches to heat recovery
operating mode after the pause.
• with the navigation arrow
so that the MZ-Home controller switches to continuous ventilation
mode after the pause.
Requirements:
• The start screen is displayed.
►
Touch the navigation arrow
.
The
output
main menu is displayed.
►
Select with the navigation arrows
/
to select the zone.
►
Use the navigation arrow
to select the menu
item
output
.
The
output level indicator
flashes.
►
Touch the navigation arrows
/
, to set the
output level.
i
4
Operation
4.1 Carry out manual control
In addition to the pre-programmed settings of the 7-day timer, the parameters for each zone can
be controlled manually depending on the situation in the menu for manual control.
Manual control has priority over the settings of the 7-day timer. The entries of the manual control
overwrite the programming of the 7-day timer for the set duration. A permanent change does not
take place!
o u t p u t < z o n e 1 >
>
o u t p u t :
m o d e : H R
i n t e r v a l : 0 2 h
>
o u t p u t < z o n e 1 >
o u t p u t :
m o d e : V E N T
i n t e r v a l : 0 2 h
o u t p u t < z o n e 1 >
o u t p u t :
>
m o d e : H R
i n t e r v a l : 0 2 h
o u t p u t < z o n e 1 >
o u t p u t :
m o d e : H R
>
i n t e r v a l : 0 2 h
