USB CONFIGURATION
Dongle is configured as an USB2.0 device of HID class.
There are 5 interfaces supported :
-
Endpoint0
used for control transfer. The size of the packet in Endpoint 0 is 32 bytes.
-
Endpoint1
used for generic
keyboard
configured as IN interrupt with keyboard protocol.
-
Endpoint2
used for
consumer electronics
control configured as IN interrupt.
-
Endpoint3
used for
raw
sensor data transfer configured as IN interrupt. The size of the packet is:
•
either 15 bytes for 6-axis sensor as defined in Payload frame format for raw sensor 6 axis and can be identified with report
ID 0x1
•
or 21 bytes for 9-axis sensor as defined in Payload frame format for raw sensor 9 axis and can be identified with report ID
0x2
•
or 15 bytes for air motion lib extra information as defined in Payload frame format for air motion lib extra info, which is
activated through
Green + 4
and can be identified with report ID 0x1
-
Endpoint4
used for
mouse
configured as IN interrupt with mouse protocol.
-
Endpoint5
used for
joystick
configured as IN interrupt with gamepad control including hat switch and 7 buttons.
Page
20
of
21
Summary of Contents for MoveaTV BLE REMOTE
Page 19: ...Page 19 of 21 ...
