Invacare® Pronto™ M61 Series with SureStep®
5.5.4
Adjusting the length of the legrest
CAUTION!
Risk of injury due to incorrect adjustment of the
footrests and legrests
–
Before and during every journey it is imperative to
ensure that the legrests contact neither the caster
wheels nor the ground
Tools:
•
5 mm Allen key
1.
Use the spanner to loosen the screw (1).
2.
Adjust to the desired length.
3.
Re-tighten the screw.
5.5.5
Adjusting the depth of the calf pad
The depth of the calf pad can be adjusted via the holding plate. The
holding plate hole combinations allow 5 different depth settings.
Tools:
•
10 mm open-ended spanner
1.
Use the open-ended spanner to loosen the nut (1) and remove.
2.
Adjust to the desired depth. Please observe that the round holes
are intended for the calf pad retaining screw and the oblong
holes for the aglet without thread.
3.
Screw the nut back on and tighten.
5.5.6
Adjusting the height of the calf pad
Tools:
•
4 mm Allen key
32
1590425-A
Summary of Contents for Wheelchair Pronto M61
Page 46: ...Invacare Pronto M61 Series with SureStep Use only batteries of the same type 46 1590425 A...
Page 65: ...Notes...
Page 66: ...Notes...
Page 67: ...Notes...
