4 OPERATION
Invacare® Solara®3G/Spree 3G Wheelchair
52
4.14 Recliner Operation
WARNING
Both gas cylinders MUST be operational and adjusted properly before using the recliner. DO NOT operate the recliner
option if only one of the gas cylinders is operational or adjusted properly.
ALWAYS make sure that the wheelchair is stable in the full reclined (back at 180°) position and the full upright (back at 90°)
position before using the recliner option.
Make sure the patient is properly positioned in the wheelchair before reclining or inclining (sitting up) to maintain maximum
stability and safety.
ALWAYS engage both wheel locks while reclining or inclining (sitting up) the wheelchair.
WARNING
When returning the occupant of the wheelchair to the full upright position, more body strength will be required for
approximately the last twenty degrees of incline (sitting up). Make sure to use proper body mechanics (use your legs) or
seek assistance to avoid injury.
Before using the recliner option, make sure the anti-tipper wheel assemblies are in the lowest adjustment hole (adjustment
hole closest to the ground/floor).
Before using ANY recline position of this wheelchair, make sure the rear wheels are in the MOST REARWARD position to
maintain the stability of the wheelchair. DO NOT change the handling/maneuverability of the wheelchair by moving the
rear wheels to any of the forward positions. Moving the rear wheels to any of the forward positions will change the center
of gravity of the wheelchair, making the wheelchair less stable.
ALWAYS return the back to the upright position before lifting the wheelchair.
Make sure occupant's hands and body are clear of all pinch points before reclining back. Pinch points exist between
spreader bar and gas cylinders. Use caution, otherwise injury may occur.
