Scorpius
Service Manual
1654773~A
36
2.10.2 SERVICE-10-2 Footplate Shroud Replacement
SERVICE-10 Front Top Shroud Repair
1. Press the front top shroud downwards by hand.
2. Allow the shroud to disengage from the center locking pin.
3. Gently bend the shroud downwards to disengage from the right-side locking pin.
4. Remove the locking pin spring on the left side.
5. Take the footplate shroud off.
❖
When reassembling, please follow the exact reverse sequence of these steps.
•
Step 5. When replacing the footplate spring, do not use too much force.
•
This might deform it and cause a loss of function.
•
Please do not leave the footplate shroud off, it must be replaced. Leaving it off is dangerous
for the user and may also damage the scooter.
•
After removing the footplate spring, keep it aside carefully. The re-installation of the spring is
more complicated. Refer to the following figures for instructions for its replacement.
