Scorpius
Service Manual
1654773~A
14
SERVICE-01-1 Top Control Panel Repair
1. Remove the steering head rear shroud and panel screws (12 mm, 2 pcs).
2. Open the steering head top shroud.
3. Also remove all the connectors on the top control board (refer to the instructions on the previous page for
connectors).
4. Remove the four screws (8 mm, 2 pcs) on the top control board.
5. Remove the entire top control board and replace with a new one.
❖
After replacing the parts be sure to use the exact reverse sequence of operations for reassembly.
•
The top control board connectors are color-coded to prevent mistakes when reconnecting.
However, it is recommended that a photo be taken that shows the connector locations
before removing the board to prevent a hassle during re-installation.
•
Step 2. If it cannot be removed, please refer to
Steering Shroud Repair for complete details on disassembly.
•
Please do not touch the terminals on the top control board, to prevent damage to the control
board circuitry.
•
During replacement of the top control board, do not disturb the metal power switch in the
center.
•
Make sure to match the connector colors and do not make modifications to any cables or
connections. Do not force connectors to avoid damage to the electrics and the scooter.
