Scorpius
Service Manual
1654773~A
13
2 Service Procedures
2.1 SERVICE-01 Steering Shroud Repair
1. Remove the steering head rear shroud and panel screws (12 mm, 2 pcs).
2. Remove the three screws (12 mm, 3 pcs) on the steering head rear shroud.
3. Remove the starter rod screws (8 mm, 2 pcs).
4. Detach the steering head rear shroud.
5. Detach the panel and steering head top shroud.
6. Make sure all the connectors on the board are properly fastened.
❖
When reassembling be sure to use the exact reverse sequence of operations.
Board Circuit Comparison Diagram:
Metal power switch connector
Power connector
Starter VR connector
Buzzer connector
Main cable connector (including headlight, taillight,
and folding/ unfolding board)
