Rea® Spirea® 4 NG
4.9 One-arm drive
The one arm-drive enables you to move the wheelchair with
one hand, which means that two hand rims are installed on
the same wheel.
WARNING!
Risk of injury
– Be careful not to trap your fingers between the
rear wheel spokes and the three brackets of the
outer hand rim when propelling the wheelchair.
The rear wheel shaft can be fitted on either the right
or the left side.
The hand rims can either be placed in line with each
other (internal position) or with the inner, smaller
hand rim outside the larger hand rim (external
position).Invacare recommends that smaller hand
rim adjustment must be carried out by a qualified
technician.
•
4 mm Allen key
•
10 mm socket spanner
4.10 Cover for footrest / foot plate
CAUTION!
Risk of imbalance
– The cover must be removed before the foot
plate is fixed in a raised position.
4.10.1 Attaching a cover to the single foot plate
1.
Thread the foot plate cover onto the foot plate.
2.
Secure the hook strips to fasten the cover on the foot
plate.
4.11 Air pump
The air pump is fitted with a universal valve connection.
Using the correct valve connection depends of the inner
tube valve type.
1.
Remove the dust cap from the valve connection.
2.
Push the valve connection onto the open valve on the
wheel and pump the wheel up.
There are two types of pumps available:
•
Low pressure <6 bars
•
High pressure >6 bars
Instruction for use printed on the packaging.
4.12 Passive illumination
You can attach reflectors to the rear wheels.
4.13 Cane holder
WARNING!
Risk of overturning
– Ensure that the cane holder does not project
beyond the external diameter of the rear wheel.
1.
Place the cane in the holder
B
.
2.
Fix the top of the cane to the backrest
A
.
22
1536533-F
