Invacare rea Focus, User Manual

Page: 25 / 48

Accessories
5.7.2 Adjusting the anti-tip device swing-away
Height adjustment / Folding:
A
B
C
1. To adjust the height, press on the two knobs
B
placed on each
side of the housing.
2. Adjust the anti-tip device tube
C
to the desired height.
Make sure that the anti-tip device is fitted correctly, the
two knobs
B must lock into position.
3. To fold the anti-tip device, press the top of the housing
A
downwards.
4. Push the anti-tip device sideways.
Do not use the knobs
B
to fold or unfold the anti-tip
device.
CAUTION!
Risk of pinching fingers
– Use the foot to fold the anti-tip device, otherwise
there is a risk of pinching the fingers between the
housing of the anti-tip device and the tube of the
anti-tip device.
5. To activate the anti-tip device, push the anti-tip device back to its
original place, it will automatically lock into position.
There is a red warning label on the housing of the anti-tip
device, this label shows when the anti-tip device is inactivated.
When the anti-tip device is correctly activated, the red label
will be concealed.
Depth adjustment:
D
1. Press on the knob D .
2. Adjust the inner wheel tube to the desired position.
Make sure that the tube is fitted correctly, the knob
D
must lock into position.
The distance between the anti-tip device and the ground as
well as the distance between the anti-tip device and the drive
wheel should be 50 mm.
5.7.3 Anti-tip device regular
Mounting and depth adjustment:
A
B
C
1. Exchange the plastic plugs on the tube of the chassis on both
sides to the enclosed ones.
2. Mount the anti-tip device on the chassis tube.
3. Secure the anti-tip device with the screw
A
and the washer and
nut
B
.
4. For depth adjustment, loosen the screw
A
and the nut
B
.
5. Adjust the depth and fit the screw
A
in one of the holes
C
.
6. Re-tighten the screw.
5 mm allen key / 10 mm fixed spanner
Height adjustment:
D
1. Release the spring loaded button D .
2. Adjust the anti-tip device to the required height.
3. Make sure that the anti-tip device locks into its new position.
1431580-B 25