SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING
Pronto
®
M94
™
26
Part No. 1122145
INSPECT/ADJUST WEEKLY
❑
Seat is secured to wheelchair frame.
❑
Seat and/or back upholstery have no rips and do not sag. Replace if necessary.
❑
Seat release latch is not worn and is functional. Replace if necessary.
❑
Inspect tires for flat spots and wear.
❑
Arm pivot points are not worn and/or loose. Replace if necessary.
❑
Inspect and clean the stability lock gears. Replace if worn.
INSPECT/ADJUST MONTHLY
❑
Wheel mounting nuts are secure on drive wheels.
❑
No excessive side movement or binding when drive wheels are lifted and spun when
disengaged (free-wheeling).
❑
Wheel/fork assembly has proper tension when caster is spun. Caster should come to
a gradual stop.
CAUTION
As with any vehicle, wheels and tires should be checked periodically for cracks and
wear and should be replaced as necessary.
❑
Loosen/tighten caster locknut if wheel wobbles noticeably or binds to a stop.
❑
Ensure all caster/wheel/fork/headtube fasteners are secure.
❑
Inspect for any loose hardware on the wheelchair.
INSPECT/ADJUST PERIODICALLY
❑
Wheelchair rolls straight (no excessive drag or pull to one side).
❑
Arms are secure but easy to release and adjustment levers engage properly (on ASBA
only).
❑
Adjustable height arms operate and lock securely.
❑
Arm pivot points are not worn and/or loose. Replace if necessary.
❑
Armrest pads sit flush against arm tubes.
❑
Seat and/or back upholstery have no rips and do not sag. Replace if necessary.
❑
Seat release latch is not worn. Replace if necessary.
❑
Inspect and clean the stability lock gears. Replace if worn.
❑
Clean upholstery and armrests.
❑
Inspect the seat positioning strap for wear. Replace if worn or damaged.
❑
Inspect charger AC power cord for damage. Replace if necessary.