Invacare® MK6i™ Electronics
13.4
Using the Basic Memory Card
DESCRIPTION
ITEM
MK6i DISPLAY
CMPJ+
JOYSTICK
A
CARD SLOT
CARD SLOT
B
N/A
JOYSTICK
C
UP/DOWN
ARROWS
N/A
D
SELECT KEY
N/A
E
N/A
MODE BUTTON
The basic memory card is recommended for storing a backup copy
of final programming settings. This card can be attached to the
wheelchair or left with the user. If the display or driver control need
exchanging, the memory card serves to restore the original settings.
Additional backup copies of the program values can be saved to the
professional memory card. For the basic memory card to restore
final program settings, the file name (system name) on the card MUST
match the system name of the MK6i Display or the MK6i Joystick.
To change the system name of the display or the joystick, refer to
Calibration Menu Description on page 85.
To use the basic memory card:
1.
Insert the basic memory card into the card slot
A
of the MK6i
display or CMPJ+ Joystick.
2.
Turn the wheelchair On.
3.
Use the joystick
B
(forward/reverse) of CMPJ+ Joystick or
up/down arrows
C
of MK6i Display to select:
•
STORE TO CARD - Create a back up file.
•
READ FROM CARD - Restore programming settings.
4.
Press one of the following to begin storing or reading:
•
Mk6i Display - Press the Select key
D
.
•
CMPJ+ joysticks - Press the mode button
E
.
68
1141471-L-00