manualshive.com logo in svg

Invacare MK6i Series, Field Reference Manual, Page: 29 / 134

Share
Download
Invacare MK6i Series Field Reference Manual Download Page 29

Invacare® MK6i™ Electronics

7

Proportional Alternative Controls

7.1

Compact Joystick (1558M6)

•

A proportional 4 Quadrant (directional) driver control with
a universal connector. Refer to 4.3 Connectors, page 18 for
more information.

•

The most versatile of proportional driver controls.

•

Used for hand control, midline control or attendant control.
Multiple aftermarket mounting options are available.

•

Requires MK6i Display if used as a “stand alone” control.

•

Connect to bank of connectors on the back of the seat.
Refer to 3.3 Disconnecting/Connecting the Connectors, page
13 and the Invacare Power Wheelchair Wiring Guide, part
number 1167603.

7.2

Proportional Attendant Control (PACM6)

•

A proportional attendant control with a universal connector.
Refer to 4.3 Connectors, page 18 for more information.

•

Plug and play.

•

Connect to connector stack on the back of the seat. Refer to
3.3 Disconnecting/Connecting the Connectors, page 13 and
the Invacare Power Wheelchair Wiring Guide, part number
1167603.

•

Typically mounts to tubing, spreader bar or back cane
handgrip. Refer to 3.6 Mounting the Proportional Attendant
Control (PACM6), page 15 for mounting instructions.

30

1141471-L-00

Summary of Contents for MK6i Series







































































































































Reviews:

No comments