Invacare LiNX REM400, User Manual, Page: 91 / 101

90 60126081-C
Fault Icon Fault Description Possible Action
Left magnetic brake fault
l
Check cables and connectors.
l
Ensure the left magnetic brake is engaged.
l
Ensure the left motor or motor lock lever is engaged.
l
Refer to the “Pushing the mobility device in freewheel mode”
chapter in the wheelchair user manual.
l
Contact your provider.
Right magnetic brake fault
l
Check cables and connectors.
l
Ensure the right magnetic brake is engaged.
l
Ensure the right motor or motor lock lever is engaged.
l
Refer to the “Pushing the mobility device in freewheel mode”
chapter in the wheelchair user manual.
l
Contact your provider.
Module fault (other than remote module)
l
Check cables and connectors.
l
Check modules.
l
Recharge the batteries.
l
If the chair was stalled, reverse away or remove any obstacles.
l
Contact your provider.
Configuration of the motors depends on the wheelchair model.
8.2 OON (“Out Of Neutral”)
OON (“Out Of Neutral”) is a safety feature that prevents accidental driving or seating movements when:
l
The system is powering up
l
After a function change
l
When the system comes out of an inhibit or drive lockout
8.2.1 Drive OON Warning
The joystick must be in the center position:
l
When a system is powering up
l
On a function change
l
When transitioning from a drive lockout or inhibit state
Otherwise, a drive OON warning displays by an overlay. During a drive OON warning, the OON overlay displays and the wheelchair
does not drive. If the joystick is returned to the center position, the warning clears and the wheelchair drives normally.
LiNX® Control System