Invacare LiNX REM400, User Manual, Page: 25 / 101

24 60126081-C
Fig. 6-1 Example of a button
1. Tap the button A to perform the action.
Switches
Switches are used to change between two different states, such
as
ON and OFF . The current state displays on the screen.
Fig. 6-2 Example of a switch
1. Tap on the switch
A
to change the state.
Sliders
Sliders are used to continuously change the value of a setting .
Fig. 6-3 Example of a slider
1. Tap and hold the circle
A
within the slider.
2. Swipe the circle to the right to increase the value. Swipe
the circle to the left to decrease the value.
LiNX® Control System