Invacare LiNX DLX-REM400, User Manual, Page: 25 / 128

Usage
Entry Function
A
Clock View and configure time, see 5.2.2
Configuring Time, page 26 .
B Screen Lock Activate screen lock, see 5.2.3
Locking Screen to Avoid Unintentional
Response, page 27
.
C Glove Mode Activate Glove Mode. Touch screen
becomes more sensitive, allowing to
interact with screen while wearing
gloves.
D
Settings Open settings menu. For configuring
settings, see
5.2.4 Configuring
Settings, page 28 .
E
Odometer View total travel, reset odometer,
select units, see
5.2.5 Configuring
Odometer, page 30 .
5.2.1 Controls on Menu Screen
Buttons
Buttons are used to perform an action, such as to close
the screen.
Currently we use the following buttons on our remotes:
Symbol Action
Close screen
Go back to previous screen
Open next screen/level. It appears only if
a menu entry permit further settings.
,
Increase or decrease the value of hour or
minute on clock
Fig. 5-8 Example of a button
1. Tap on button
A
to perform the action.
Switches
Switches are used to change between two different states,
such as
ON and OFF . The current state is visible on screen.
Fig. 5-9 Example of a switch
1. Tap on switch A to change the state.
Sliders
Sliders are used to change value of a setting continuously.
1637423-H 25