Invacare LiNX DLX-REM400, User Manual, Page: 10 / 128

Invacare® LiNX
3.2.1 Battery bar
The battery bar provides a graphical display of the battery’s
current state of charge and, when a battery charger is
connected, the charging status.
Battery bar displays green
when state of charge is
between 60 and 100%.
Battery bar displays orange
when state of charge is
between 20 and 59%.
Battery bar displays red
when state of charge is less
than 20%.
Charging.
3.2.2 Status Bar
Fig. 3-1
A
Profile name
B
Time
C
Status information
Profile Name
The profile name can only be set by the provider.
Time
The time is displayed as a 12– or 24–hour clock. It is set
using the coordinated universal time (UTC) and an offset
based on the location (country) of the user. The UTC is
automatically acquired when a system is connected to a
programming and diagnostic tool. The country-based offset
is set through the remote module’s Menu screen. See
5.2.4
Configuring Settings, page 28 .
Status Information
The status information displays the current state of the LiNX
system with status icons.
This notifies you that a drive lock-out
is active. A drive lock-out is a state
that prevents the wheelchair being
driven. See
5.19.3 Speed Reduction and
Seating Function Inhibits, page 73 for
more information about lock-outs and
slow-downs.
This notifies you that a drive slow-down
is active. A drive slow-down is a state
that prevents the wheelchair being
driven at maximum speed for safety
reasons. Instead, the wheelchair is
allowed to drive at a reduced speed
for the duration of the active drive
slow-down. See
5.19.3 Speed Reduction
and Seating Function Inhibits, page 73
for more information about lock-outs
and slow-downs.
10 1637423-H