1
For more information regarding Invacare products, parts, and services,
please visit www.invacare.com
InTouch™ Flovair Seat
Model Nos. ITFG, ITFM
NOTE:
Check
all
parts
for
shipping
damage.
In
case
of
shipping
damage,
DO
NOT
use.
Contact
carrier/dealer
for
further
instruction.
To
ensure
the
safe
installation,
operation
and
use
of
the
Flovair
seat,
these
instructions
MUST
be
followed:
WARNING
DO NOT use this equipment without first reading and understanding these
instructions. If you are unable to understand the Warnings, Cautions, and
Instructions, contact distributor before attempting to use this equipment,
otherwise, injury or damage may result.
Check all parts for shipping damage and test before use. In case of damage,
DO NOT use. Contact the distributor for further instructions.
The Flovair cushion IS NOT designed for use in the treatment of pressure
sores.
Skin condition should be checked very frequently after the installation of any
new seat.
Your therapist and physician should be consulted if you have any questions
regarding weight relief, self-examination of the skin, or individual limitations
and needs.
Make sure the hook and loop fastening straps are securely attached between
the seating surface and cushion before using.
The Flovair cushion has a weight limitation of 250 lbs for cushion widths up to
and including 20” and 350 lbs for cushion widths over 20”.
Invacare products are specifically designed and manufactured for use in
conjunction with Invacare accessories. Accessories designed by other
manufacturers have not been tested by Invacare and are not recommended
for use with Invacare products.
INSTALLATION WARNING
After ANY adjustments, repair or service and before use, make sure that all
attaching component parts are secure.
NOTE:
Fluid
in
the
pelvic
pressure
‐
relieving
insert
may
have
a
tendency
to
migrate
downward
if
the
cushion
is
resting
or
stored
in
the
vertical
position.
If
this
is
the
case,
please
remove
the
outer/inner
cover
to
inspect
the
insert.
If
migration
has
occured,
gently
knead
the
insert
to
ensure
a
uniform
volume
of
fluid
exists
across
the
surface.
Assembly, Installation and Operating Instructions
SAVE THESE INSTRUCTIONS
